Login    
 
    Sensing Systems
       IPID
       IPID Architectural Blending
       IPID Architectural Bollard
       Flight Line Security
       TASS
       Marinet
       FOIDS
       HDS
       LanDataSecure
    Rapid Deployable / TASS
    Surveillance & Assessments
    Gunfire Detection (VIPER)
    Biometrics (Facial Recognition)
    Water & NBCR (Sentinal - Patent     Pending)
    Command & Control (IDMS)
 
 
 
Home > Products > Sensing Systems > Flight Line Security
Flight Line Security

Flight Line Security® Series 4000F
The FLS was developed to protect high valued assets at air bases including aircraft parking areas, igloos and flight lines. The pulsed Infrared Perimeter Intrusion Detection (IPID®) system is comprised of all commercial-off-the-shelf (COTS) proven and certified technologies. FLS uses solid state electronics that are not affected by environmental conditions such as birds, small animals, snow, puddles, leaves or grass. It works in rain, snow and fog, instantly identifying the intrusion zone via normally open or closed dry contacts that can be interfaced with any user's data communication and annunciator. IPID does not emit false alarms. The system will only alarm if an object breaks the 3.54 in" diameter beam more than 98.5%.
 
 

 
Operation of Photovoltaic Power System (PPS)
The PPS offers an ideal solution for low current draw remote systems, eliminating the need for external voltage regulators and improving the MTBF factors. High reliability is ensured through quality assurance processes. With the photovoltaic panel mounted on the FLS assembly, a system becomes self-contained and applicable for remote and sensitive areas. Tamper and low power signals can be reported to central control through the use of the rapid deployment RF communication system.
 
PPS Specifications
Housing Glass reinforced panel with aluminum support channels.
Dimensions 14" w x 23"h (for each of the two (2) panels required)
Output Voltage 12 or 24 VDC
Output Power 44 Watts
Output current 2.5 amps per panel @ 14.7 VDC
2.5 Amps for two panels @24 VDC
Battery back-up 12 hours


The ECSI Intrusion Detection Monitoring System (IDMS®) is a PC based monitoring and control system used for monitoring, control and assessment of FLS systems. IDMS utilizes hardware and applications software, which are configured to provide a user-friendly system for recording alarms.

The IDMS platform consists of a Pentium PC running on Windows™ 95/98, Windows NT or Windows 2000. This operating system runs the Graphic User Interface (GUI), the Database Management (DMS) and sensor specific utility interfacing software.

 

PDF 103K - Adobe Reader Required
 
 
  ©2005 ECSI International, Inc. All Rights Reserved.
790 Bloomfield Avenue, Building C-1, Clifton, NJ 07012
(973) 574-8555 | info@anti-terrorism.com